|
|
|
|
|
|
Link Handle 69022 Hill Pattern Slant Style Pig Ring, 12.5 ga Wire, Steel, Copper Coated
|
|
|
Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Link Handle 69024 Hill Pattern Shoat, Slant Style Hog Ring, 12.5 ga Wire, Steel, Copper Coated
|
|
|
Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Link Handle 69027 Hill Pattern Slant Style Hog Ring, 12.5 ga Wire, Steel, Copper Coated
|
|
|
Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Link Handle 69300 Humane Pattern Pig Ring, 11 ga Wire, Steel, Copper Coated
|
|
|
11 gauge copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings.
|
|
|
|
|
|
|
|
|
|
Link Handle 69029 Hill Pattern Slant Style Hog Ring, 11 ga Wire, Steel, Copper Coated
|
|
|
Copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay.
|
|
|
|
|
|
|
|
|
|
Link Handle 69302 Humane Pattern Hog Ring, 11 ga Wire, Steel, Copper Coated
|
|
|
11 gauge copper coated steel, economical, used for hog rings and general purpose applications. Slant cut for applications requiring penetration. Non-offset for a close with the tips nearly touching. Ideal for large diameter materials such as fence wire where a small gap between the tips is okay. Box 25 rings.
|
|
|
|
|
|
|
|
|
|
Link Handle 69045 Hill Hog Ringer Plier, 6-1/2 in OAL, Malleable Iron
|
|
|
Specially designed to hold and close hog rings and ring fasteners. Made from tough malleable iron castings with zinc plated finish. Use with ring patterns Nos.H1, H2, H3, PBH1, PBH2, PBH3, B1, B2 and B3.
|
|
|
|
|
|
|
|
|
|
Link Handle 69356 Small Crab Ring Plier, 6-1/4 in OAL, Malleable Iron
|
|
|
Made from tough malleable iron castings with zinc plated finish. Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern Nos.541, 641, 741, 742, all rings less than 3/4".
|
|
|
|
|
|
|
|
|
|
Link Handle 69305 Humane Hog Ringer Plier, 7-3/4 in OAL, Malleable Iron
|
|
|
Specially designed to hold and close hog rings and ring fasteners. Use with ring pattern Nos.X1, X3, H1, H2, H3, PBH1, PBH2, PBH3, B1, B2, B3.
|
|
|
|
|
|
|
|
|
|
Link Handle 69324 Crab Pot Slant Offset Cage/Trap Ring, 14 ga Wire, Steel, Galvanized
|
|
|
14 gauge galvanized steel for applications where moderate cost and resistance to rust are important. Slant cut for applications requiring penetration such as hog rings. Offset design allows ring to pass for complete closure. Best for fastening small diameter materials that could pass through a small gap.
|
|
|
|
